Expandable Sleeving Can Add an Extra Layer of Protection to Your Wiring

When you have to run wiring in an area where there is significant risk of it becoming damaged due to abrasion or cutting the chances of the wire insulation providing enough protection to keep it from becoming damaged are slim. In order to give your wiring harness the protection needed, you may find that you should be using expandable sleeving.

Expandable Sleeving Is Designed to Stretch Over Your Wires

Expandable sleeving such as that sold in our online catalog is designed to be stretched over the top of one or more wires in order to allow you to create bundles. Once released it shrinks back to size forming a snug outer layer that will protect your wires from damage. If you working in an area where your wires are likely to be exposed to heat, you can buy Kevlar sleeving that is designed to provide a layer of insulation and keep your wires from being burned or melting.

 

Posted in Uncategorized | Tagged | Leave a comment

A Cable Tie Tool Can Save Your Fingers

Running a large wiring harness throughout a large building can be a very time consuming process and it can also be very hard on your fingers. When you are working in enclosed and small spaces, you may not have enough room to get your hand in place to pull the tie tight and risk cutting yourself on the sharp ends when it is cut. A cable tie tool can make this job a lot easier and less hazardous to your hands.

Our Cable Tie Tool Makes the Operation Single Handed

The cable tie tool in our online catalog can turn what can be a two handed operation into a single handed task. Not only does the tool pull the tie tight, it cuts the excess tie off flush so that you have far less risk of cutting yourself on sharp edges. It can also allow you to reach into tight spaces and be able to install a cable tie where you might not be able to by hand.

 

Posted in Uncategorized | Tagged | Leave a comment

A Reusable Cable Plastic Tie Can Make Your Life Easier

Everybody loves the cable plastic tie, it can be used for so many jobs around the house and at work that most people keep at least a few of them around for various jobs. The only problem with the cable plastic tie is that it is a single use item, once you have used it, if you need to remove it you will need to cut it to get it loose. That is fine when using the tie for certain jobs that will never be disturbed, such as plumbing, wiring in the walls or in your automobile. But if you think that you will need to remove the cable plastic tie at any time, then there is a much better solution.A

Reusable Plastic Cable Tie Is Good for the Environment

The reusable cable plastic tie gives you all the usefulness of a regular plastic tie, but it allows you to remove it and reuse it over and over again. Good for the environment and the budget these ties are better for jobs that will need to be redone over and over again. Visit us online to check out our plastic ties for all types of jobs.

 

Posted in Uncategorized | Tagged | Leave a comment

Working Carefully with the Right Heat Shrink Gun

For those who work in the electronics and electrical world is not having the right tools for the job is one of the biggest problems they must face. Often you will a technician using his cigarette lighter in place of a heat shrink gun on heat shrink tubing. No matter how careful the technician is, this type of heat source is not going to provide the even heat source needed to cause the tubing to shrink properly.

A Heat Shrink Gun Will Stop You from Burning Holes

More often than not this type of heat will burn holes in the tubing, leaving the wiring or connectors exposed. This can cause short circuits or corrosion to occur, neither of which is good. When you use a heat shrink gun from our online catalog, you have a steady source of heat that is the correct temperature. Used properly, your heat shrink tubing will shrink evenly and without being burnt, giving you a properly protected connection.

 

Posted in Uncategorized | Tagged | Leave a comment

Keep Your Wiring Harness Dry with Heat Shrink Sleeve

In the marine industry every wire in the ship must be completely protected from the effects of being at sea for what can be many months at a time. The slightest moisture in a single wire can have disastrous results. Even if every effort is made to place the wiring harnesses in secure and dry environments, there is still the distinct possibility of water getting into the wires. In these situations the use of adhesive lined heat shrink sleeve from our online catalog to cover wires and connections is highly recommended.

Adhesive Heat Shrink Sleeve Creates a Complete Seal

When heat is applied to this type of heat shrink sleeve the adhesive inner lining melts as the tubing shrinks. This adhesive will flow around the wire and into any connection along the way. After everything has cooled off the entire assembly will be completely sealed against moisture intrusion so that you no longer have to worry about wiring problems.

 

Posted in Uncategorized | Tagged | Leave a comment

A Cable Gun Tie Can Save You Time and Money

If you use cable ties a lot, then you may want to consider the purchase of cable tie gun, not only does this tool shorten the amount of time it takes to bundle wires and cables, but it also makes it easier to get to areas where there is not a lot of reach and get the job done fast and easy. In tight spots where your fingers cannot work a cable tie gun will get the job done in just a fraction of the time.

The Cable Tie Gun Sets the Tension Perfectly

A cable tie gun tightens your cable tie perfectly to where it needs to be You don’t want the tie too loose or it will slip and cause the wires to go where you don’t want them to, too tight and you can damage wires. With a cable tie gun your bundles will be perfect. A cable tie gun eliminates waste because of cable ties that are not properly placed, and saves you time that you can spend getting other things done.

 

Posted in Uncategorized | Tagged | Leave a comment

Keep Your Cables Properly Protected Inside Braided Sleeving

If you are assembling electrical products and the wires and cables you are using are likely to be subjected to damage by moving parts or any one of many other things such as sharp edges, you must find a way to protect them. You can tie them out of the way, but the chances of them being damaged are not completely eliminated, until you wrap them in protective braided sleeving.

Braided Sleeving Fits Your Cables Snugly

Braided sleeving is manufactured to fit snugly over your cables or bundles of wires to provide an extra level of protection. This sleeving can be made from nylon, Kevlar and several other materials; however, the most important thing is that by providing this extra layer of protection you can ensure the integrity of the wires and cables in your finished product. We carry a full line of braided sleeving to help you select the right one to protect your wiring.

 

Posted in Uncategorized | Tagged | Leave a comment

The Shrink Wrap Heat Gun Offers Temperature Control

While heat shrink tubing is without a doubt the best way to protect repairs in wiring or reinforce connectors, it does have one problem. If you are not careful and apply too much heat to get it to shrink, you are going to end up burning a hole in it or melting it completely. This is why you should always use a shrink wrap heat gun to do the job.

A Shrink Wrap Heat Gun Is Easily Controlled

Unlike that disposable lighter you keep in your toolbox that applies a very hot and very direct source of heat to the heat shrink tubing, a shrink wrap heat gun is much more controlled. Instead of a naked flame, it produces a temperature controlled flow of hot air. This indirect form of heat will cause the heat shrink tubing to shrink evenly and not allow it to burn or melt.

 

Posted in Uncategorized | Tagged | Leave a comment

The Right Heat Shrink Tube Can Prevent Corrosion

One of the more damaging problems faced in electrical wiring is that of corrosion, whether it comes from the environment the wires are located in or simply because of the weather. This type of corrosion can be responsible for causing damage to connections and cause havoc to the systems that the wires are a part of. The best way to prevent this is to find that the right type of heat shrink tube that will form a very good corrosion resistant seal.

Adhesive Heat Shrink Tube Is Perfect for This Purpose

The popular form of heat shrink tube sold in our online catalog that is used for this purpose is the double wall or adhesive type. As you apply heat, the tubing will shrink to form a tight fit around the wire and splice or connecter and the inner layer of adhesive melts. This adhesive flows in and around the wire forming tight weatherproof seal that will keep out the corrosion that can be so destructive to the wiring.

 

Posted in Uncategorized | Tagged | Leave a comment

The Nylon Cable Tie Is an Amazing Household Tool

One of the greatest inventions ever made for the household the cable nylon tie offers you the ability to attach anything to anything, bundle things together, keep houseplants up right, fix luggage tags and zippers and dozens of other uses. A nylon cable tie makes a great fix when something breaks, as well as being a great way to hang things when you are in a pinch.

We Carry a Nylon Cable Tie for You in Many Colors

You can get the nylon cable tie in a number of different colors so you can even use it as part of your household décor as many artists and furniture makers have started to do. Of course they are also extremely handy for bundling wires and cables which is one of the many purposes they were made for. Our online catalog is filled with many different varieties of cable nylon ties for use at home, at work and anywhere else you need a quick fix.

 

Posted in Uncategorized | Tagged | Leave a comment