Why pay retail?™

Free Solar Power Bank Gift with select purchases

 

2:1 Chinese Polyolefin Heat Shrinkable Tubing

View Dimensions and Technical Specifications

2 to 1 Standard Wall Polyolefin Heat Shrink Tubing

Recently, we were offered a deal that we couldn't pass up. We purchased some new material from a reputable factory overseas, at prices that at first appeared too good to be true. When we tested the material in our lab, we found that it held up to the same standards as the major brands. Even after that, we still remained skeptical. Therefore, we will not certify this material to M23053/5. It does however meet all of the requirements for UL approval (several production runs passed UL VW-1 and the aging tests in our lab).

We will not represent this material as anything other than what it is - High quality, inexpensive off-shore material. If you require material that can be certified to AMS-DTL-23053/5, don't buy this material. If you're looking for mil spec caliber material, and don't need an actual certification, give this material a try...you may find that the price is NOT too good to be true.

Features:

  • 2:1 Shrink Ratio (shrinks to ½ its original diameter)
  • Maximum Continuous use temperature 125°C
  • Shrink Temperature of 120°C and continuous operating temperature of -55°C to + 125°C
Note: Tubing is always referred to by Nominal ID, not flat width. Flat widths are approximate, and are provided for reference purposes only.

Bulk Ordering Information - Black only

Part number

Nominal ID

Flattened Width

ID after shrinking

ft/spool

Price/spool

Total feet
Total Price
Add to Cart
HS2X-0047

3/64"

1/16"

0.023"

500

$42

2500
$210
HS2X-0063

1/16"

1/8"

0.031"

500

$43

2500
$215
HS2X-0094

3/32"

1/8"

0.047"

500

$44

2500
$220
HS2X-0125

1/8"

3/16"

0.063"

500

$48

2500
$240
HS2X-0188

3/16"

5/16"

0.094"

500

$58

2500
$290
HS2X-025

1/4"

3/8"

0.125"

250

$36

1250
$180
HS2X-0375

3/8"

9/16"

0.188"

250

$41

1250
$205
HS2X-050

1/2"

13/16"

0.250"

250

$50

1250
$250
HS2X-075

3/4"

1-3/16"

0.375"

200

$50

1000
$250
HS2X-100

1"

1-9/16"

0.500"

200

$75

1000
$375
HS2X-150

1-1/2"

2-3/8"

0.750"

100

$73

500
$365

 

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

 

 

 

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

$35

 

Micro Therm MJ-600- Pocket sized cordless refillable butane heat source. Great alternative to electric heat guns. Waterproof piezo electronic ignition, safety lock trigger, and a reflector shield for use with heat shrink.

$25