The Model 141 shrink tubing cutter will cut up to 5200 4 inch piece in 1 hour! With an adjustable input space of 1.5" x 3", you can cut a wide range of wire and tubing in sizes up to 1 gauge, and hollow tubing up to 1.5" OD. Feed rates range from 1" per second up to 30" per second. Machine comes equipped with adjustable guides and chute opening for clean, square cuts. Standard cut accuracy +/- 1 mm. Cuts adhesive-lined heat shrink tubing, basic polyolefin heat shrink, convoluted loom tubing (split or unsplit), and many other types. Tubing sold separately. Please contact us if the option you want is not shown on the website
Two-handed operation requires operator to simultaneously press each button, located (1) one each side of machine to activate operation.
Large red “emergency stop” switch located at top of unit, that stops cutting wire or tubing when pressed.
Plexiglas safety shield, held magnetically in place covers the keyboard to prevent unintended activation.
Power & Air Requirements: 115/230 volts at 50/60-hertz single phase and air pressure maintained @ 80 psi min
System Size: Overall Height 19” x Housing Height 13”
Unit Weight: 55 LBS
Warranty: Every model carries the same one year warranty on electronics and mechanical elements (exclusive of blades or poly-wheels) or one million cuts, whichever comes first.