Adhesive Lined Heat Shrink Tubing 2:1 Ratio | 4 Ft Length

BuyHeatShrink® 2 to 1 Adhesive Lined Heat Shrinkable Tubing

Features:

  • Good mechanical strength and cut-through resistance
  • Environmentally seals and protects
  • Meets UL, CSA and military specifications
  • RoHS compliant
  • Operating temperature range -40°C to 130°C
  • Sizes range from 1/8” to 2”
  • Standard color is black
  • AMS-DTL-23053/4 Class 1, 2 & 3. 
  • UL/CSA
Diameter Mil Specification #Manufacturer Part # BUY (4ft Length)
1/8" N/AHS2A-0125
$2.40 HS2A-0125-BK
3/16" N/AHS2A-0188
$2.60 HS2A-0188-BK
1/4" AMS-DTL-23053/4-201-0HS2A-025
$2.80 HS2A-025-BK
3/8" AMS-DTL-23053/4-202-0HS2A-0375
$4.00 HS2A-0375-BK
1/2" AMS-DTL-23053/4-203-0HS2A-050
$5.00 HS2A-050-BK
3/4" AMS-DTL-23053/4-204-0HS2A-075
$7.20 HS2A-075-BK
1" AMS-DTL-23053/4-205-0HS2A-100
$10.00 HS2A-100-BK
1-1/2" AMS-DTL-23053/4-206-0HS2A-150
$14.00 HS2A-150-BK

Our 4 feet cut pieces of 2:1 heat shrink tubing is also available with a "dual-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire. Meets M23053/4 Class 2

  • Dimensions & Technical Specs

100 foot min. Black only. For colors or small amounts view our 3:1 adhesive heat shrink
AMS-DTL-23053/4- Nominal ID Part #
N/A 1/8" HS2A-0125
201-0 1/4" HS2A-025
202-0 3/8" HS2A-0375
203-0 ½" HS2A-050
204-0 ¾" HS2A-075
205-0 1" HS2A-100
206-0 1 ½" HS2A-150
Write Your Own Review
You're reviewing:Adhesive Lined Heat Shrink Tubing 2:1 Ratio | 4 Ft Length
Your Rating
Products you might like!
Heat Shrink Tubing Dual Wall Adhesive Lined 4:1 Ratio
Heat Shrink Tubing Dual Wall Adhesive Lined 4:1 Ratio
$1.92
 
Adhesive Lined Heat Shrink Tubing 3:1 Ratio
Adhesive Lined Heat Shrink Tubing 3:1 Ratio
$2.00