Canusa CPX 100 Heat Shrink Tubing
Looking for a less expensive alternative? Try BuyHeatShrink 2:1 Heat Shrink Tubing
NOTE - THERE IS A 1-2 WEEK LEAD TIME
Features
-
2:1 Shrink Ratio (shrinks to ½ its original diameter)
-
Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
-
UL 224 VW-1 and CSA OFT recognized
-
Maximum Continuous use temperature 135°C
-
Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
-
Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP-301, LG GSHS-1635F
-
Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
| Diameter | MFR Part Number | Mil Specification | Flat Width | ID after shrinking | Buy |
|---|---|---|---|---|---|
| 1/16" | CPX-100-0063 | AMS-DTL-23053/5-102 | 1/8" | 0.031" | |
| 3/32" | CPX-100-0094 | AMS-DTL-23053/5-103 | 1/8" | 0.047" | |
| 1/8" | CPX-100-0125 | AMS-DTL-23053/5-104 | 3/16" | 0.063" | |
| 3/16" | CPX-100-0187 | AMS-DTL-23053/5-105 | 5/16" | 0.094" | |
| 1/4" | CPX-100-0250 | AMS-DTL-23053/5-106 | 3/8" | 0.125" | |
| 3/8" | CPX-100-0375 | AMS-DTL-23053/5-107 | 9/16" | 0.188" | |
| 1/2" | CPX-100-0500 | AMS-DTL-23053/5-108 | 13/16" | 0.250" | |
| 3/4" | CPX-100-0750 | AMS-DTL-23053/5-109 | 1-3/16" | 0.375" | |
| 1.5" | CPX-100-1500 | AMS-DTL-23053/5-111 | 2-3/8" | 0.750" | |
| 2" | CPX-100-2000 | AMS-DTL-23053/5-112 | 3-1/8" | 1.00" |
| Products you might like! |
|
| 2:1 Polyolefin Heat Shrink Tubing Rolls |
| $16.87 |
