Adhesive Lined Heat Shrink Tape | 1 In. X 25 Ft. | 3 Colors

$10.99

Features

  • Dual wall (adhesive lined) heat shrinkable tape, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Forms pressure-tight and waterproof seal to communications, power cables and most electrical wires and cables
  • Shrink temperature of 105C
  • Continuous use temperature of up to 105C
  • 20 kV/mm (500 V/mil) minimum electric strength (e.g. 0.031"=31 mil= 15kV)
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
Rating:
100% of 100

Shrinkable Insulation Tape, Heat Shrink Tape

Have you ever had an application that required heat shrink tubing, but you can't remove the connector to get the tubing onto the wire? 4:1 heat shrink tubing isn't a high enough shrink ratio for you? Do you need a wrap around or slit heat shrink product? Perhaps Heat Shrink Tape is the best product for you.

Just simply wrap our adhesive lined heat shrinkable tape around your wire, like you would normal electrical tape. Fasten the ends with a cable tie, and shrink using our economical VT-1100 shrink wrap heat gun, cut off the cable ties, and you've got a water-tight seal without hours of labor reattaching your connector!

The ideal heat shrink temperature for our heat shrink tape is around 221°F (105°C).

Features

  • Dual wall (adhesive lined) heat shrinkable tape, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Forms pressure-tight and waterproof seal to communications, power cables and most electrical wires and cables
  • Shrink temperature of 105C
  • Continuous use temperature of up to 105C
  • 20 kV/mm (500 V/mil) minimum electric strength (e.g. 0.031"=31 mil= 15kV)
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
  • Dimensions & Technical Specs

Write Your Own Review
You're reviewing:Adhesive Lined Heat Shrink Tape | 1 In. X 25 Ft. | 3 Colors
Your Rating