Heat Shrink Tape

$10.99

Features

  • Dual wall (adhesive lined) heat shrinkable tape, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Forms pressure-tight and waterproof seal to communications, power cables and most electrical wires and cables
  • Shrink temperature of 105C
  • Continuous use temperature of up to 105C
  • 20 kV/mm (500 V/mil) minimum electric strength (e.g. 0.031"=31 mil= 15kV)
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
PROPERTY TEST METHOD VALUES
Operating Temperature Range n/a -55C to 105C
Shrink Temperature n/a 105C
Tensile Strength ASTM D638
12 Mpa minimum
Ultimate Elongation ASTMD638 350% minimum
Specific Gravity ISO 1183 1.95 maximum
Dielectric Strength IEC 243
20KV/mm minimum
Fluid Resistance
Gasoline
Lubricating Oil
Hydraulic Fluid
Water
ISO 1817 no degradation

Shrinkable Insulation Tape, Heat Shrink Tape

Have you ever had an application that required heat shrink tubing, but you can't remove the connector to get the tubing onto the wire? 4:1 heat shrink tubing isn't a high enough shrink ratio for you? Do you need a wrap around or slit heat shrink product? Perhaps Heat Shrink Tape is the best product for you.

Just simply wrap our adhesive lined heat shrinkable tape around your wire, like you would normal electrical tape. Fasten the ends with a cable tie, and shrink using our economical VT-1100 shrink wrap heat gun, cut off the cable ties, and you've got a water-tight seal without hours of labor reattaching your connector!

The ideal heat shrink temperature for our heat shrink tape is around 221°F (105°C).

  • Dimensions & Technical Specs

Tape Width Wall Thickness Feet per roll
Adhesive Lined Heat Shrink Tape 1" 0.8mm (0.031") 25
Write Your Own Review
You're reviewing:Heat Shrink Tape
Your Rating