3M MDT Adhesive lined Medium wall heat shrink tubing
3M MDT Adhesive lined Medium wall heat shrink tubing
NOTE - THERE IS A 1-2 WEEK LEAD TIME
Features:
- Shrink Ratio as high as 4:1 with melt adhesive inner lining (shrinks up to 1/4 its original diameter)
- Longitudinal Shrinkage: up to 10%
- Meets requirements of AMS-DTL-23053/15 (formerly MIL-I-23053/15), Class 2
- UL 224 VW-1 flame retardant (jacket only)
- Maximum Continuous use temperature 110°C
- Shrink Temperature of 120°C and operating temperature of -55°C to + 110°C
- Crosses to: Canusa CFM, same as 3M IMCSN, Tyco Raychem RMW, LG PMWT
- Typical applications include: Electrical insulation - Ideal for exposed or underground applications providing good insulation, waterproofing and mechanical protection. Also suitable for Mechanical and abrasion protection, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
- Looking for quality at a lower cost? Try BuyHeatShrink Medium Wall Adhesive Heat Shrink Tubing

Min ID Before Shrinking | 3M Part # | Min ID before shrinking | Max ID after shrinking | Jacket Wall thickness after shrinking | Adhesive Wall thickness after shrink | Buy |
---|---|---|---|---|---|---|
0.4" | MDT-0400 | 0.40" | 0.15" | 0.09" | 0.01 | |
0.8" | MDT-0800 | 0.80" | 0.22" | 0.10" | 0.01 | |
1.1" | MDT-1100 | 1.10" | 0.37" | 0.10" | 0.01 | |
1.5" | MDT-1500 | 1.50" | 0.50" | 0.10" | 0.02 | |
2" | MDT-2000 | 2.00" | 0.75" | 0.10" | 0.02 | |
3" | MDT-3000 | 3.00" | 1.00" | 0.12" | 0.02 | |
4.3" | MDT-4300 | 4.30" | 1.50" | 0.15" | 0.02 |
Products you might like! |
![]() |
3:1 Heavy Wall Adhesive Lined Heat Shrink Tubing | 4 Ft Length |
$10.28 |
![]() |
3:1 Medium Wall Adhesive Lined Heat Shrink Tubing | 4 Ft |
$6.67 |