4:1 PTFE Heat Shrink 4ft per piece

PTFE Heat shrink (4:1)

Features:

  • Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
  • Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
  • FDA and USP Class VI approved
  • Very low coefficient of friction
  • Good dielectric strength
  • Flame rating UL94 V0 and VW-1
  • Limiting Oxygen Index greater than 95
  • ETO and autoclave sterilizable
  • Mil spec approved (AMS-DTL-23053/12)
  • Please note – PTFE heat shrink will NOT shrink with a conventional heat gun. It requires the use of a torch or mandrel.  See “Specifications” tab below for more information

Rating:
100 % of 100
Diameter Mil Spec#Manufacturer Part #ID Before ShrinkID After ShrinkWall After Shrink BUY (4ft Length)
5/64" AMS-DTL-23053/12-501HSTFE4-00780.078"0.025".009"
$5.81 HSTFE4-0078
1/8" AMS-DTL-23053/12-502HSTFE4-0125.125"0.037".012"
$5.13 HSTFE4-0125
3/16" AMS-DTL-23053/12-503HSTFE4-01880.187"0.050"0.012"
$5.83 HSTFE4-0188
1/4" AMS-DTL-23053/12-504HSTFE4-0250.250"0.063"0.012"
$6.45 HSTFE4-025
5/16" AMS-DTL-23053/12-505HSTFE4-03130.312"0.078"0.012"
$13.80 HSTFE4-0313-CL
3/8" AMS-DTL-23053/12-506HSTFE4-03750.375"0.096"0.012"
$8.51 HSTFE4-0375
7/16" AMS-DTL-23053/12-507HSTFE4-04380.438"0.112"0.012"
$32.00 HSTFE4-0438-CL
1/2" AMS-DTL-23053/12-508HSTFE4-0500.500"0.144"0.015"
$9.61 HSTFE4-050
5/8" AMS-DTL-23053/12-510HSTFE4-06250.625"0.178"0.015"
$13.40 HSTFE4-0625
3/4" AMS-DTL-23053/12-512HSTFE4-0750.750"0.224"0.015"
$17.30 HSTFE4-075
7/8" AMS-DTL-23053/12-513HSTFE4-08750.875"0.244"0.015"
$65.00 HSTFE4-0875-CL
1" AMS-DTL-23053/12-514HSTFE4-1001.00"0.278"0.015"
$21.60 HSTFE4-100-CL
1-1/2" AMS-DTL-23053/12-516HSTFE4-1501.50"0.40.015"
$37.40 HSTFE4-150-CL