Heat Shrink Tubing Polyolefin 2:1 Ratio | Pre-Cut Pieces
2:1 Pre-Cut Polyolefin Heat Shrinkable Tubing
Note - there is a 2-3 week lead time for all cut pieces
Features:
-
2:1 Shrink Ratio (shrinks to ½ its original diameter)
-
Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
-
UL 224 VW-1 and CSA OFT recognized
-
Maximum Continuous use temperature 135°C
-
12 standard colors: Black, Clear, Red, White, Blue, Yellow, Brown, Gray, Orange, Green, Violet and Yellow/Green
-
Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
-
Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP301 heat shrink, Canusa CPX-100, LG GSHS-1635F
-
Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
-
This is the same product as our 2:1 Polyolefin heat shrink, sold in precut pieces.
| Diameter | Bag | Mil Specification # | Manufacturer Part # | ID Before Shrink | ID After Shrink | Wall After Shrink | Flat Width | (Note - there is a 2-3 week lead time for all cut pieces.) |
|---|---|---|---|---|---|---|---|---|
| 3/64" | 1000 PCS/BAG | AMS-DTL- 23053/5-101 | HS2-0047 | 0.046" | 0.023" | 0.018" | 1/16" | |
| 1/16" | 1000 PCS/BAG | AMS-DTL- 23053/5-102 | HS2-0063 | 0.063" | 0.031" | 0.018" | 1/8" | |
| 3/32" | 1000 PCS/BAG | AMS-DTL- 23053/5-103 | HS2-0094 | 0.093" | 0.046" | 0.019" | 1/8" | |
| 1/8" | 1000 PCS/BAG | AMS-DTL- 23053/5-104 | HS2-0125 | 0.125" | 0.062" | 0.019" | 3/16" | |
| 3/16" | 1000 PCS/BAG | AMS-DTL- 23053/5-105 | HS2-0188 | 0.187" | 0.093" | 0.019" | 5/16" | |
| 1/4" | 500 PCS/BAG | AMS-DTL- 23053/5-106 | HS2-025 | 0.25" | 0.125" | 0.026" | 3/8" | |
| 3/8" | 500 PCS/BAG | AMS-DTL- 23053/5-107 | HS2-0375 | 0.375" | 0.187" | 0.026" | 9/16" | |
| 1/2" | 500 PCS/BAG | AMS-DTL- 23053/5-108 | HS2-050 | 0.5" | 0.25" | 0.029" | 13/16" | |
| 5/8" | 500 PCS/BAG | AMS-DTL- 23053/5-5/8 | HS2-0625 | 0.625" | 0.313" | 0.033" | 1" | |
| 3/4" | 250 PCS/BAG | AMS-DTL- 23053/5-109 | HS2-075 | 0.75" | 0.37" | 0.035" | 1-3/16" | |
| 1" | 250 PCS/BAG | AMS-DTL- 23053/5-110 | HS2-100 | 1" | 0.5" | 0.039" | 1-9/16" | |
| 1-1/2" | 250 PCS/BAG | AMS-DTL- 23053/5-111 | HS2-150 | 1.5" | 0.75" | 0.039" | 2-3/8" | |
| 2" | 250 PCS/BAG | AMS-DTL- 23053/5-112 | HS2-200 | 2" | 1" | 0.045" | 3-1/8" |
2:1 Pre-Cut Polyolefin Heat Shrinkable Tubing
Features:
-
2:1 Shrink Ratio (shrinks to ½ its original diameter)
-
Meets requirements of SAE AMS-DTL-23053/5 (formerly MIL-I-23053/5, MIL-DTL-23053/5), Classes 1, 2 (Clear), and 3
-
UL 224 VW-1 and CSA OFT recognized
-
Maximum Continuous use temperature 135°C
-
12 standard colors: Black, Clear, Red, White, Blue, Yellow, Brown, Gray, Orange, Green, Violet and Yellow/Green
-
Shrink Temperature of 120°C and operating temperature of -55°C to + 135°C
-
Crosses to : Sumitomo B2, Raychem RNF-100, Alpha FIT-221, 3M FP301 heat shrink, Canusa CPX-100, LG GSHS-1635F
-
Typical applications include: Insulation, Wire Identification, Wire Bundling, Mechanical Protection, Color Coding, Lightweight Harnessing, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.
-
This is the same product as our 2:1 Polyolefin heat shrink, sold in precut pieces. Note - there is a 2-3 week lead time for all cut pieces.
Write Your Own Review
| Products you might like! |
|
| Hot Melt Tape For Heat Shrinkable Tubing |
| $15.00 |
|
| Heat Shrink Tubing Adhesive Lined 3:1 Ratio Cut pieces |
| $25.00 |
|
| Printable Flat Heat Shrink Tubing 3:1 Ratio | PreFlattened |
| $65.00 |
