|Operating Temperature Range||n/a||-55C to 105C|
|Tensile Strength||ASTM D638||
12 Mpa minimum
|Ultimate Elongation||ASTMD638||350% minimum|
|Specific Gravity||ISO 1183||1.95 maximum|
|Dielectric Strength||IEC 243||
|ISO 1817||no degradation|
Have you ever had an application that required heat shrink tubing, but you can't remove the connector to get the tubing onto the wire? 4:1 heat shrink tubing isn't a high enough shrink ratio for you? Do you need a wrap around or slit heat shrink product? Perhaps Heat Shrink Tape is the best product for you.
Just simply wrap our adhesive lined heat shrinkable tape around your wire, like you would normal electrical tape. Fasten the ends with a cable tie, and shrink using our economical VT-1100 shrink wrap heat gun, cut off the cable ties, and you've got a water-tight seal without hours of labor reattaching your connector!
The ideal heat shrink temperature for our heat shrink tape is around 221°F (105°C).
|Tape Width||Wall Thickness||Feet per roll|
|Adhesive Lined Heat Shrink Tape||1"||0.8mm (0.031")||25|