Heat Shrink End Cap | Adhesive Lined | 3:1 Shrink Ratio

Heat Shrink End Cap

Features:
  • Dual wall end cap, with internal wall of hot-melt adhesive provides excellent bonding to plastic and metals.
  • Forms pressure-tight seal on ends of communication and power cables
  • Shrink temperature of 120-135C
  • Continuous use temperature of up to 110C
  • 15 kV/mm (381 V/mil) minimum electric strength (e.g. 0.12"=120 mil=45kV)
  • 3 to 1 shrink ratio, so only 6 sizes are needed to cover a range of 0.16" to 5"
  • Adhesive lining will prevent moisture penetration, allowing for long term storage of cable
  • New LONG sizes available in some diameters
Rating:
97 % of 100
Diameter NominalID Before ShrinkLength Before ShrinkID After ShrinkWall Thickness Buy
1/8" Nipple end 1/8"0.1250.870.0230.048
$0.35 HSEC-0125
3/16" Nipple end 3/16"0.18710.060.062
$0.42 HSEC-0188
1/4" Nipple end 1/4"0.251.120.080.078
$0.45 HSEC-025
3/8" Nipple end 3/8"0.391.340.160.08
$0.65 HSEC-0375
1/2" 1/2"0.551.770.180.08
$1.00 HSEC-050
1/2" NIpple end 1/2"N0.551.770.180.08
$0.78 HSEC-050-N
1" 1 inch12.760.310.09
$1.47 HSEC-100
1-1/2" 1 1/2"1.383.350.590.12
$1.67 HSEC-150
1-1/2" Long 1 1/2"1.654.330.590.12
$2.00 HSEC-150L
2" 2"2.174.3310.13
$2.53 HSEC-200
2" Long 2"2.175.510.910.15
$3.00 HSEC-200L
3" 3"2.954.721.380.14
$2.82 HSEC-300
3" Long 3"2.955.911.380.15
$3.25 HSEC-300L
4" 4"3.946.11.970.16
$3.67 HSEC-400
4" Long 4"4.136.691.770.16
$4.00 HSEC-400L
5" 5"4.726.12.360.16
$4.64 HSEC-500
6" 6"6.35.93.230.16
$7.50 HSEC-630
8" 8"7.875.93.540.165
$11.00 HSEC-787