Semi Rigid Adhesive Lined Heat Shrink Tubing (4ft/piece)

Semi Rigid Adhesive Lined Heat Shrink Tubing

Features:
  • Operating Temperature: -55° C to 110° C
  • Shrink Temperature: 120° C
  • Shrink Ratio: 3 to 1
  • Longitudinal Shrinkage: up to 15%
Diameter Mil Specification #Manufacturer Part # BUY (4ft Length)
1/8" AMS-DTL-23053/4-101-0HS3AR-0125
$2.70 HS3AR-0125-BK
3/16" AMS-DTL-23053/4-102-0HS3AR-0188
$3.00 HS3AR-0188-BK
1/4" AMS-DTL-23053/4-103-0HS3AR-025
$4.40 HS3AR-025-BK
3/8" AMS-DTL-23053/4-104-0HS3AR-0375
$4.50 HS3AR-0375-BK
1/2" AMS-DTL-23053/4-105-0HS3AR-050
$5.20 HS3AR-050-BK
3/4" AMS-DTL-23053/4-106-0HS3AR-075
$9.40 HS3AR-075-BK
1" AMS-DTL-23053/4-107-0HS3AR-100
$9.80 HS3AR-100-BK

Specifications/Approvals:

Military: AMS-DTL 23053/4 Class 1 (Formerly Mil-I-23053/4)

Underwriters Lab: UL 224 600V, 125°C, VW-1, (Jacket only), CSA

Crosses to: Sumitomo W5DL, Raychem SCL, Alpha FIT-300, 3M MW, Canusa CPA-300, LG GSHS-3625WS

Semi-Rigid Dual Wall Heat Shrinkable Tubing

Our heat shrink tubing is also available with a "melt-wall" construction. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, inner layer forms an adhesion layer between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.

Features:
  • Operating Temperature: -55° C to 110° C
  • Shrink Temperature: 120° C
  • Shrink Ratio: 3 to 1
  • Longitudinal Shrinkage: up to 15%
  • Dimensions & Technical Specs

100 foot minimum - Black only
AMS-DTL-23053/4- Nominal ID Part #
101-0 1/8" HS3AR-0125
102-0 3/16" HS3AR-0188
103-0 1/4" HS3AR-025
104-0 3/8" HS3AR-0375
105-0 ½" HS3AR-050
106-0 ¾" HS3AR-075
107-0 1" HS3AR-100
Write Your Own Review
You're reviewing:Semi Rigid Adhesive Lined Heat Shrink Tubing (4ft/piece)
Your Rating