PTFE Heat shrink (2:1) - 4ft per piece

PTFE Heat shrink (2:1)

NOTE - THERE IS A 2-3 WEEK LEAD TIME

Features:

  • Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
  • Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
  • FDA and USP Class VI approved
  • Very low coefficient of friction
  • Good dielectric strength
  • Flame rating UL94 V0 and VW-1
  • Limiting Oxygen Index greater than 95
  • ETO and autoclave sterilizable
  • Mil spec approved (AMS-DTL-23052/12)
  • Please note – PTFE heat shrink will NOT shrink with a conventional heat gun. It requires the use of a torch or mandrel.  See “Specifications” tab below for more information

Diameter Mil Specification #Manufacturer Part #ID Before ShrinkID After ShrinkWall After Shrink BUY (4ft Length)
1/8" AMS-DTL-23053/12-215-CHSTFE2-01250.215"0.130"0.020"
$18.50 HSTFE2-0125-CL
1/4" AMS-DTL-23053/12-221-CHSTFE2-0250.390"0.249"0.020"
$31.00 HSTFE2-025-CL
5/16" AMS-DTL-23053/12-225-CHSTFE2-03130.470"0.329"0.02
$58.00 HSTFE2-0313-CL
3/8" AMS-DTL-23053/12-228-CHSTFE2-03750.560"0.399"0.025"
$45.00 HSTFE2-0375-CL
7/16" AMS-DTL-23053/12-229-CHSTFE2-04380.655"0.462"0.025"
$60.00 HSTFE2-0438-CL
1/2" AMS-DTL-23053/12-230-CHSTFE2-0500.750"0.524"0.025"
$74.00 HSTFE2-050-CL
5/8" AMS-DTL-23053/12-231-CHSTFE2-06250.930"0.655"0.030"
$135.00 HSTFE2-0625-CL
3/4" AMS-DTL-23053/12-232-CHSTFE2-0751.125"0.786"0.035"
$135.00 HSTFE2-075-CL
7/8" AMS-DTL-23053/12-233-CHSTFE2-08751.310"0.911"0.035"
$116.00 HSTFE2-0875-CL
1" AMS-DTL-23053/12-234-CHSTFE2-1001.500"1.036"0.035"
$280.00 HSTFE2-100-CL