Why pay retail?™

Free Solar Power Bank Gift with select purchases

 

Medium Wall Direct Burial Heat Shrinkable Tubing

 
View Properties


Medium Wall Adhesive Lined Heat Shrinkable Tubing

 

For direct burial of heavy duty electrical cable, where environmental protection is necessary. Tubing is supplied with an adhesive layer, adding a water tight seal to the strain relief the tubing provides. When exposed to heat (usually a bit lower than the activation temperature of the heat shrink), the inner layer begins to flow (just like a hot melt glue). When the tubing shrinks and cools down, the inner layer forms an adhesion layer between the tubing and the component or wire. This provides a watertight seal, protecting the connector and/or wire in direct burial and submersed applications

Features

  • 3:1 Shrink Ratio with melt adhesive inner lining (shrinks to 1/3 its original diameter)
  • Longitudinal Shrinkage: up to 10%
  • Meets requirements of AMS-DTL-23053/15 (formerly MIL-I-23053/15), Class 2
  • UL 224 VW-1 flame retardant (jacket only)
  • Maximum Continuous use temperature 110°C
  • Shrink Temperature of 120°C and operating temperature of -55°C to + 110°C
  • Crosses to: Canusa CFM, 3M IMCSN, 3M MDT, Tyco Raychem RMW, LG PMWT
  • Typical applications include: Electrical insulation - Ideal for exposed or underground applications providing good insulation, waterproofing and mechanical protection. Also suitable for Mechanical and abrasion protection, Physical/Electrical Protection of Components, Strain Relief, and Solder Insulation.

Medium Wall Adhesive Lined Heat Shrink Tubing - Ordering Information


Color available: Black

 

Nominal

AMS-DTL-23053

Min ID before shrinking

Max ID after shrinking

Wall thickness after shrinking
Length*

Price/pc

 
Jacket
Adhesive

3/8"

/15-201

0.394"

0.118

0.039
0.010
4'

$6.67

5/8"

-

0.630"

0.197

0.055
0.012
4'

$7.60

1"

-

0.984"

0.315

0.079
0.014
4'

$10.13

1-3/8"

/15-203

/15-204

1.378"

0.372

0.079
0.014
4'

$12.18

1-1/2"
/15-205
1.50" 0.500 0.10 0.020 4' $15.50

2"

/15-208

1.969"

0.630

0.079
0.014
4'

$16.60

2-1/2"

-

2.480"

0.748

0.095
0.016
4'

$19.22

3"

-

2.953"

0.866

0.106
0.016
4'

$19.53

3.35"
-
3.346"
0.984
0.110
0.016
4'
$24.84
3.75"

-

3.740"
1.142
0.122
0.018
4'
$27.76
4.5"
-
4.528"
1.339
0.122
0.018
4'
$31.98
5.5"
-
5.512"
1.654
0.122
0.018
4'
$35.51

 

*Also available in precut pieces. Please inquire.

For $35 extra you can get our economy model heat gun. It has two air speeds, and a temperature control dial for temperatures ranging from 250° to 1100°F

$35

 

 

Heat Guns

VT-1100 with 2 Air Speeds, and a temp. control dial for range of 250°F - 1100°F

$35

 

The Blazer Products Hot Shot MT-3000 is an extremely versatile micro torch, featuring a 2500°F wind resistant blue flame, push button piezo electric ignition, and a simple dial at the top for easy flame adjustment, and precise flame control. Flat bottom and lock switch allow for table top hands free use. Burn time approx 35 minutes, with an adjustable flame length of 3/4" to 4".

$29