3M EPS200 Adhesive lined heat shrink tubing (4ft/piece)

3M EPS-200 2 to 1 Adhesive Lined Heat Shrinkable Tubing

3M 2:1 heat shrink tubing is supplied standard with a "dual-wall" construction. When exposed to the heat from a heat gun (roughly at 90°C), the inner layer begins to flow (just like a hot melt adhesive). When the tubing shrinks and and subsequently cools down, the inner layer solidifies and forms a moisture barrier between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.
Diameter Mil Specification #Manufacturer Part # BUY (4ft Length)
1/8" N/AEPS200-1/8
$4.50 HS-EPS200-0125-BK
1/4" AMS-DTL-23053/4-201-0EPS200-1/4
$5.00 HS-EPS200-025-BK
3/8" AMS-DTL-23053/4-202-0EPS200-3/8
$6.00 HS-EPS200-0375-BK
1/2" AMS-DTL-23053/4-203-0EPS200-1/2
$7.00 HS-EPS200-050-BK
3/4" AMS-DTL-23053/4-204-0EPS200-3/4
$12.00 HS-EPS200-075-BK
1" AMS-DTL-23053/4-205-0EPS200-1
$14.00 HS-EPS200-100-BK
1-1/2" AMS-DTL-23053/4-206-0EPS200-1-1/2
$24.00 HS-EPS200-150-BK

3M EPS-200 2 to 1 Adhesive Lined Heat Shrinkable Tubing

3M 2:1 heat shrink tubing is supplied standard with a "dual-wall" construction. When exposed to the heat from a heat gun (roughly at 90°C), the inner layer begins to flow (just like a hot melt adhesive). When the tubing shrinks and and subsequently cools down, the inner layer solidifies and forms a moisture barrier between the tubing and the component or wire. This provides a water-tight seal, protecting the connector and/or wire.
AMS-DTL-23053/4-Nominal IDPart #
N/A 1/8" EPS200-1/8
201-0 1/4" EPS200-1/4
202-0 3/8" EPS200-3/8
203-0 ½" EPS200-1/2
204-0 ¾" EPS200-3/4
205-0 1" EPS200-1
206-0 1 ½" EPS200-1-1/2
Write Your Own Review
You're reviewing:3M EPS200 Adhesive lined heat shrink tubing (4ft/piece)
Your Rating