Media thickness (label & liner): .0025” to .010” (.06mm to .25mm)
Maximum full-width media thickness for cutter: .010” (.25mm)
Maximum media roll size: 8.0” (203mm)
Fan fold media: loads through rear or bottom of printer
Gap and notch sensing standards: - Gap between labels: 2-4 mm, 3mm standard - Sensing notch: .25” (6mm) W x .12” (3mm) L - Sensing hole: 0.08” (2.0mm) diameter - Black Mark on back of label: minimum length of 2 mm (0.08”) long and 12 mm (0.47”) wide
Ribbon Specifications
Ribbon width range: 1” (25m) to 4.5” (114mm)
Standard ribbon lengths: 300m (984’), 450m (1476’) and 600m (1969’)
Standard ribbon wound coated side in, optional field installable thermal transfer mechanism supports ribbons wound coated side out.
Communications Specifications
One EIA RS-232/DB-25 serial connector. 2400, 4800, 9600, 19.2K and 38.4K baud supported.
One IEEE 1284 Compliant Parallel interface port
One internal connector for use with an external media cutter and present sensor
Optional SNMP Internal Ethernet Adaptor supporting 10/100 mbps transfer rate with 10-Base-T connector
Optional Internal USB interface
Internal Font Sets
Nine Bit-Mapped Fonts, rotatable 0, 90 180, 270 degrees
CG-Triumvirate™ Scalable Font
CG Triumvirate™ Condensed Bold Scalable Font
Bar Code Symbologies & Specifications
Bar Code Modulus: 5 mil to 110 mil “X” dimension in picket fence or ladder orientations
All printed barcodes meet the requirements of ANSI Document X3A1-3, Guideline for Barcode Print Quality, Grade A
Supported Barcode Symbologies include Code 39 (used to produce industry standards such as AIAG, HIBC, LOGMARS), Interleaved 2 of 5, Code 128 (Subsets A,B,C), Codabar, LOGMARS, UPC-A, UPCE, UPC2&5 digit addendums, EAN-8, EAN-13, EAN 2&5 digit addendums, UPC random weight, Code 93, Plessey, Universal Shipping Container Symbology, Code 128 MOD 43, Postnet, USS/EAN-128 random weight, Telepen, UPS MaxiCode (Mode 2 & 3), QR Code, PDF417, Datamatrix, EAN 128 support (with function character support, ITF support)