FEP/PTFE (standard wall) Dual Shrink tubing (4ft per piece)
FEP/PTFE Dual Shrink Heat Shrinkable Tubing
NOTE - Due to extreme instability in the PTFE market, prices are subject to change without notice. Lead times can be up to 10 weeks.
Features
-
Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
-
Outstanding resistance to almost any chemical known (exceptions: alkali metals in molten state, fluorine gas at high temperatures, chlorine trifluoride).
-
FDA and USP Class VI approved
-
Very low coefficient of friction
-
Good dielectric strength
-
Flame rating UL94 V0 and VW-1
-
Limiting Oxygen Index greater than 95
-
ETO and autoclave sterilizable
-
Mil spec approved (AMS-DTL-23052/12)
| Diameter | Manufacturer Part | Before Shrinking | After shrinking | Wall Thickness | BUY (4ft Length) |
|---|---|---|---|---|---|
| 1/32" | HSFEP/PTFE-SW-0036 | 0.036" | *0.036* | 0.023" | |
| 1/16" | HSFEP/PTFE-SW-0060 | 0.060" | *0.060* | 0.028" | |
| 1/8" | HSFEP/PTFE-SW-0125 | 0.130" | *0.130* | 0.032" | |
| 3/16" | HSFEP/PTFE-SW-0188 | 0.19 | 0.062" | 0.035" | |
| 1/4" | HSFEP/PTFE-SW-025 | 0.250" | 0.125" | 0.035" | |
| 3/8" | HSFEP/PTFE-SW-0375 | 0.350" | 0.190" | 0.035" | |
| 1/2" | HSFEP/PTFE-SW-050 | 0.450" | 0.312" | 0.055" | |
| 3/4" | HSFEP/PTFE-SW-075 | 0.700" | 0.440" | 0.055" | |
| 1" | HSFEP/PTFE-SW-100 | 0.950" | 0.630" | 0.065" |
